-
ICF-1150 Series
Industrial RS-232/422/485 to fiber converters
Features and Benefits
3-way communication: RS-232, RS-422/485, and fiber
Rotary switch to change the pull high/low resistor value
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
-40 to 85°C wide-temperature range models available
C1D2, ATEX, and IECEx certified for harsh industrial environments
-
TCF-142-RM Series
RS-232/422/485 to fiber slide-in modules for the NRack System™
Features and Benefits
Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
1 or 150 kilo-ohm adjustable pull high/low resistor
Supports ring and point-to-point transmission
-
TCF-142 Series
RS-232/422/485 to fiber converters
Features and Benefits
Ring and point-to-point transmission
Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF-142-S) or 5 km with multi-mode (TCF-142-M)
Decreases signal interference
Protects against electrical interference and chemical corrosion
Supports baudrates up to 921.6 kbps
Wide-temperature models available for -40 to 75°C environments
-
TCF-90 Series
Port-powered RS-232 to fiber converters
Features and Benefits
Uses either external power or power over serial
Extends RS-232 transmission up to 40 km with single-mode (TCF-90-S) or 5 km with multi-mode (TCF-90-M)
Reduces signal interference
Protects against electrical interference and chemical corrosion
Compact size
-
Transio A52/A53 Series
Entry-level RS-232 to RS-422/485 converters
Features and Benefits
Automatic Data Direction Control (ADDC) RS-485 data control
Automatic baudrate detection
RS-422 hardware flow control: CTS, RTS signals
LED indicators for power and signal status
RS-485 multidrop operation, up to 32 nodes
2 kV isolation protection (A53)
Built-in 120-ohm termination resistors
-
TCC-120/120I Series
Industrial RS-422/485 converters/repeaters with optional 2 kV isolation
Features and Benefits
Boosts serial signal to extend transmission distance
Wall mounting or DIN-rail mounting
Terminal block for easy wiring
Power input from terminal block
DIP switch setting for built-in terminator (120 ohm)
Boosts RS-422 or RS-485 signal, or converts RS-422 to RS-485
2 kV isolation protection (TCC-120I)
-
TCC-100/100I Series
Industrial RS-232 to RS-422/485 converters with optional 2 kV isolation
Features and Benefits
RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2-wire or 4-wire RS-485 conversion
2 kV isolation protection (TCC-100I)
Wall mounting and DIN-rail mounting
Plug-in terminal block for easy RS-422/485 wiring
LED indicators for power, Tx, Rx
Wide-temperature model available for -40 to 85°C environments
-
TCC-82
Port-powered RS-232 4-channel isolators
Features and Benefits
Four channels of 4 kV RMS isolation for 1 minute
External power source supported but not required
Automatic baudrate detection
Compact size
-
TCC-80/80I Series
Port-powered RS-232 to RS-422/485 converters with optional 2.5 kV isolation
Features and Benefits
External power source supported but not required
Compact size
Converts RS-422, and both 2-wire and 4-wire RS-485
RS-485 automatic data direction control
Automatic baudrate detection
Built-in 120-ohm termination resistors
2.5 kV isolation (for TCC-80I only)
LED port power indicator
-
NE-4100-ST Series
10/100 Mbps embedded serial device servers with a starter kit
Features and Benefits
10/100 Mbps Ethernet interface
Supports a baudrate of up to 230.4 kbps
Low power consumption at 1.5 W, with single +5 V input
-
NE-4100 Series
10/100 Mbps embedded serial device servers
Features and Benefits
10/100 Mbps Ethernet interface
Supports baudrates up to 230.4 kbps
Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
Supports DHCP, BootP, Static IP, and ARP
SNMP and email alerts for event trapping and notifications
Half the size of a credit card—only 57 × 40 mm
Low power consumption at 1.5 W, with single +5 V input
-
MiiNePort E3 Series
10/100 Mbps embedded drop-in module serial device servers with PoE pass-through support
Features and Benefits
Use Moxa’s high-quality and reliable second-generation MiiNe SoC
Variety of operation modes fulfill specific application requirements
Green design with extremely low power consumption
MiiNePort NetEZ technology makes integration incredibly easy
Highly compact embedded device module